Jump to content
BiXBiT forum

All Activity

This stream auto-updates     

  1. Last week
  2. Hi Frozenwave, I don’t really understand why are you trying to flash with sd-card. If you have problem with signature check, you need to flash your asic with remsig patch, and right after with our firmware.
  3. Can someone explain me hot to install firmware from sd? I have download SD image, flash it to sd card with echer, changed fuse on s9 board. When I powered it up and opened ip web address it loaded some board repair page. I was trying to find how to get firmware but without success. when I took out SD card and return fuse to normal and login to ip address with browser I could see bixbit firmware but I couldn't do anything because I got offline status
  4. Hi, Ini. No, and i can't tell you estimated time.
  5. Earlier
  6. Hello, As I and others plan for the halving in May I plan to purchase S19Pro, Do you have update on firmware for S19Pro, ETA? Thanks, Ini
  7. Hi, Eddie. It all depends on the quality of the chips and the air temperature. Under ideal conditions, overclocking for air cooling is not inferior to overclocking for immersion cooling and reaches 80 th/s for S17 and up to 60 th/s for T17 Anyway, when the critical temperature is reached, the devices will turn off automatically, so do not worry that your device can be damaged due to overclocking
  8. @BiXBiT What are the highest air-cooled hashrates we can achieve with S17 and T17 with current firmware and preset profiles. I'm asking for somewhat of a safe speed, like the 16.5Th/s on the S9 model with your firmware, which is very stable for me? I know the S9 is limited to 16.5Th/s by the original bitmain APW of 1600W, so whats the limitation of the S17 and T17 in terms of power supply and aircooling capability? Thank you!
  9. This is normal process. Don't worry
  10. Glad to help. Around 2 hours, and i strongly recommend you to finish this process without interrupting. I see your frequency is 450, this is very low. Use profile and then complete autotune to make your ASIC works at maximum performance.
  11. The miner fan noise goes up and down and is not consistent is this caused by the auto-tuning feature? is this normal operation? Also is there a way to disable auto-tuning? Thanks, Ini
  12. Thank you that worked and I was able to install firmware. So my next question is how long does it take for auto-tuning process to complete?
  13. Hi, you need to flash your firmware by using SD-card. Instruction: Download the archive with the firmware image, links: for S17/S17Pro http://bixbit.io/assets/firmware/S17_SD_Recovery.rar for T17 http://bixbit.io/assets/firmware/T17_SD_Recovery.rar Extract the archive files to the root of SD card Unplug the ASIC from the power source and insert SD card into it Turn on the ASIC - two lights will light up Wait until the ASIC appears in the network with a new IP address Remove the SD card Check whether the firmware version has changed Unlock SSH according to the firmware instructions
  14. Please see miner information for S17 Pro 56TH model. { "minertype":"Antminer S17 Pro", "nettype":"DHCP", "netdevice":"eth0", "hostname":"antMiner", "ipaddress":"192.168.5.24", "netmask":"255.255.255.0", "gateway":"", "dnsservers":"", "curtime":"14:48:01", "uptime":"1", "loadaverage":"0.05, 0.16, 0.17", "mem_total":"233744", "mem_used":"126676", "mem_free":"107068", "mem_buffers":"1196", "mem_cached":"0", "system_mode":"GNU/Linux", "ant_hwv":"19.10.1.3", "system_kernel_version":"Linux 4.6.0-xilinx-gff8137b-dirty #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018", "system_filesystem_version":"Wed Dec 25 09:47:07 CST 2019", "cgminer_version":"1.0.0" }
  15. Seems, ASIC is on your network, can you also show your ini settings ?
  16. Hi, Ini. Try to ping your device from the VM machine. Ping YOUR_ASIC_IP -t make a screenshot and attach it to your post.
  17. I installed Windows VM and I set the VM to thesame network as the S17pro miners. I get Antminer not found even though the IP Range is correct and password is also correct. What am I doing wrong?
  18. You need to unlock ssh, before updating. There are two ways to run bat: install windows using VM, or bootcamp; ask someone who have windows to help you.
  19. Yes I extracted the files first and then updated settings.cfg, I am using MacOS so I cannot use the bat files. So after updating settings.cfg what do I have upload to Mining rig.
  20. Inside archive you can find installation manual. Please, extract files first
  21. No I did no, upload the following file: antminer_s17pro-bixbit.zip should I upload as a tar? and can you send detail instructions? Thanks
  22. Hi, do you extract files from the Zip archive?
  23. Hello, When I try to update S17Pro 56TH Miner with latest firmware, I am getting the following error: Please advise as to what I am doing wrong. It looks like I am not using the correct tarfile. Thanks
  1. Load more activity
×
×
  • Create New...