3.3 POOL AND WORKER SETUP

This setting can be done both using the WhatsMinerTool utility and through the miner’s web interface.

3.3.1 CONFIGURATION OF POOLS THROUGH THE UTILITY WHATSMINERTOOL

• In the main window of the utility, check the list of miners ① that need to change the pool and worker.
• Press the button [ Pools ] ②. An area with the corresponding form will open.
• Fill in the fields ③ Pool, Worker, Pwd (password) by the required data.
• If you have only one or two pools - just uncheck the unnecessary lines in the form.

• Press the button [ Start Update ] ④, pool settings will be applied.
• To hide the pools form - press the [Pools] button ① again.

3.3.2 CONFIGURATION OF POOLS THROUGH THE WEB INTERFACE OF THE MINER

• Open the IP address of the miner in the browser (for example, https://192.168.88.96) and enter the login / password set on the device (by default - admin / admin)
• Go to section ① Configuration > Miner Configuration, tab Pool
• To set the pool in the Pool 1 drop down menu ② select custom. An input field will appear instead of the drop down menu.
• Fill in the field that appears, as well as Pool 1 worker and Pool Password ③

• If necessary, set the Pool 2 and Pool 3
• Press [Save & Apply], to save settings.

After changing pools, you need to restart the miner.