Home Firmwares WhatsMiner Series m6x

BiXBiT firmware for ASIC Whatsminer M6x series

Alternative firmware for Whatsminer M6x series is designed for all models and allows you to overclock ASIC up depending on the configuration.

Installation guide
  • Hotel fee
  • Frequency
    overclocking
  • Downvolting
  • Proxy server
  • Immersion
    cooling
  • Up-to-date
    device support
  • Overclocking
    with two
    hash boards
  • Affiliate
    program
  • Technical support
  • Remote
    monitoring
    (coming soon)

Differences and fee

  • Removes factory restrictions on PSU, voltage and chip frequencies.
  • Allows to increase the power up to 10% on three boards and up to 40% on two.
  • Developer fee – 2.8%.
Installation guide

Installation manual

Important!

Overclocking a device with poor cooling can damage the device.

  • Download BiXBiT firmware for M6x series
  • Check the control board model and the firmware version installed. This can be done using WhatsMinerTools:

    whatsminer tool

    or by checking the Status -> Overview tab in the ASIC web interface:

    asic web panel

  • If your device has a control board H6os

    asic web panel

    use WhatsminerTool to install the firmware by uploading the file «Whatsminer- ALL-Models_X.X.X.bin», where «Х.Х.Х» - is the firmware version.
  • If your device has a control board H616 and the firmware version is before December 13, 2023 or if BiXBiT firmware is already installed:

    asic web panel

    use WhatsminerTool to install the firmware by uploading the file «Whatsminer- ALL-Models_X.X.X_h616-before20231213.bin», where «Х.Х.Х» - is the firmware version.
  • If your device has a control board H616 and the firmware version is after December 13, 2023::

    asic web panel

    use the firmware image «Whatsminer-ALL-Models_ Х.Х.Х_h616-after20231213.img» and the PhoenixCard utility to write the intermediate firmware versionto an SD card. Then use the SD card to flash your device to the intermediate firmware version. The detailed process of flashing ASIC via SD card is shown in the video. After installing the intermediate firmware version, update your ASIC to the latest BiXBiT firmware using WhatsminerTool with the file «Whatsminer-ALL-Models_X.X.X.bin».

Show detailed user guide